This Is The E-Flite 30-Amp Pro Switch-Mode Bec Brushless Esc V2. This Esc Is High-Quality, Efficient, Sensorless And Has An Integrated Switch-Mode Bec. It Is Capable Of Up To 30 Amps Continuous Current When Using 3- To 4-Series Li-Po Battery Packs. You Can Drive Up To 7 Analog Or 6 Digital Standard-Sized Servos With The Bec On Any Recommended Input Voltage. It Has Advanced Programmable Features Such As Low Voltage Cutoff, Braking, Timing And Throttle Input Range.
Key Features:
- Up To 30 Amps Continuous Current With Proper Air Flow And 35 Amps Burst Current (15 Seconds)
- 3.5A Continuous Current, 5V Switch-Mode Bec Circuit
- Stronger Bec For Support Of Most 3-Axis Stabilization Systems
- Drive Up To 7 Analog Or 6 Digital Standard-Size Servos With The Bec
- 3- To 4-Cell Li-Po, 9- To 12-Cell Ni-Mh/Ni-Cd Input Voltage
- Programmable Motor Braking
- Safe Power-Arm Mode Prevents Accidental Starts
- Programmable Low Voltage Cutoff With Settings For 3-Cell Li-Po (9.2V), 4-Cell Li-Po (12V) Or 74% Of Battery Starting Voltage
- Programmable Throttle Input Range (1.1Ms 1.9Ms Or 1.2Ms 1.8Ms)
- Programmable Soft Start For Helis And Airplanes
- Auto Motor Shut Down If Signal Is Lost Or There Is Interference
- Programmable Timing 5 User-Selectable Ranges For Use With A Large Variety Of Brushless Motors
- Pre-Wired Connectors—E-Flite Ec3 Connector On Battery Input And 3.5Mm Gold Bullet Connectors On Motor Output Leads
Reviews
There are no reviews yet.